What automatic door accessories are used in automatic door accessories

There are many types of automatic door fittings. Their use enables the automatic door to recognize the action of the person approaching the door as a control unit that opens the door, opens the door through the drive system, automatically closes the door after the person leaves, and realizes the opening and closing process. Controlled system. Next, Xiao Bian will introduce the automatic door accessories and the use of automatic doors.

What are the automatic door accessories

1. Main controller: It is the command center of automatic doors. Through large-scale integrated blocks programmed with internal programs, it issues corresponding instructions to direct the work of motors or electric lock systems; at the same time, people adjust the opening speed of the door through the main controller. Turn on parameters such as amplitude.

2. Inductive Detector: Responsible for collecting external signals, like people's eyes, when a moving object enters its working range, it gives the main controller a pulse signal.

3, power motor: to provide the main power to open and close the door, control the door leaf acceleration and deceleration.

4. Door leaf movement track: Just like the railroad track of the train, the spreader wheel system of the door leaf is constrained to make it travel in a specific direction.

5. Door spreader running wheel system: It is used to suspend the active door leaf and drive the door leaf under the power traction.

6. Timing belt: It is used to transmit the power generated by the motor, and the traction door spreader wheel system.

7. Lower guide system: It is the guide and positioning device at the lower part of the door leaf to prevent the swing of the door body before and after the door leaf runs.

Automatic door usage matters

1. Please pass the automatic door in order. Please do not force the automatic door to close when the door closes or when the door closes, and ensure that the door is opened to allow more than one person to pass the automatic door.

2. Do not congest an automatic door, hit an automatic door, or use an external force to damage the automatic door device and door body.

3. Children with a height of 1.2 meters or less, elderly and handicapped people with mobility problems should pass the automatic door with the help of a guardian, otherwise the consequences are at their own risk.

4, please do not stay in the automatic door for a long time, do not put any obstacles in the automatic doorway.

5. When the automatic door is in the auto-sensing state, please do not stay in the sensing area and the automatic mouth for a long time.

6. In the event of power failure, manually push the automatic door leaf to the two sides. When the automatic door fails or in an emergency, please turn off the power of the automatic door and manually push the automatic door leaf.

7. Please affix the eye-catching logo (such as company name, company logo, etc.) on the fixed glass door of the automatic door and the movable glass door to avoid people from colliding with the automatic door glass.

Automatic door daily inspection method

1. The inspection personnel shall move from the outside or inside the door to the automatic door at normal speed. The automatic door shall open automatically. The movement of the automatic door shall be smooth and there shall be no collision. After the automatic door is opened, the personnel will be about 150mm-200mm per second. When the speed is slow through the automatic door, the automatic door should remain open.

2. When the inspector leaves the detection area of the automatic door sensor, after the time delay is 1-10 seconds (the length of time can be set by the automatic door switch parameter), the automatic door will be automatically closed, the action of the automatic door should be smooth and no collision occurs. Case.

3. Observers normally pass the walking route of the automatic door, and need to adjust the daily walking route to the person walking toward the automatic door instead of going to the automatic door at a certain angle.

4. When going to an automatic door, the sensing width of the automatic door sensor should be greater than the width of the fully opened door.

5. If the automatic door is equipped with an auxiliary safety light sensor (infrared radiation protection device), when the automatic door leaf is opened, the person stands still, and the auxiliary safety light sensor is blocked by hand, and the door should be kept open. The door should be closed again within a few seconds of the hand leaving.

Editor's summary: What are the automatic door accessories and the use of automatic doors are introduced here, I hope to help everyone. If you want to know more about yourself, you can follow the information on this site.

Automatic Door Glass Automatic Door Induction Automatic Door Automatic Door Accessories